Ken Bromley Art Supplies

• Low viscosity - very fluid.
• Produces a matte finish
• Does not drastically reduce colour depth as does Matte Medium.
• 100% acrylic polymer varnish. Water soluble when wet. Good chemical and water resistance when dry.
• Dry to a non-tacky, hard, flexible surface that is resistant to retention of dirt.
• Resist discolouring (non-yellowing, non-fogging) due to humidity, heat and ultraviolet light.
• Depending upon substrate, allows moisture to pass through (breathable).
• Will not crack as surface expands and contracts during temperature and humidity changes. Applicable for any acrylic painted surface (flexible and rigid) on canvas, paper, wood, stone, Plexiglas, etc.
• Not for use over oil paint.
• Flexible, archival, non-yellowing and water resistant when dry.
• For interior use only

Application

• Apply as a final varnish over dry acrylic paint.
• Varnish surface and environment must be clean, dry and dust free.
• Acrylic paintings must be completely dried and cured for a minimum 48-72 hours before varnishing.
• Application may be done by brush or spray. Generally a sprayed application will be thinner, smoother and more even. Rolling or sponging application is not recommended.
• If more than 1 varnish coat is desired, apply 1-2 coats of Liquitex® Gloss Varnish before applying a final coat of Liquitex Matte Varnish.
• Caution: Acrylic paints and mediums become increasingly brittle in cold weather. Do not apply below 60 degrees.